|
 |
 | SEIKENSHA Continuous Cooker/Extractor
This system mixes and cooks by utilising a stainless steel screw driving through a steam jacketed S/S barrel.
Solids enter the system via an overhead mounted feed hopper via an adjustable feed rate "gate" valve. A facility exists for a liquid addition to the screw barrel, immediately following the solids entry point. The liquid feed is via an on board S/S 1/2" pump and 1/2" thick wall tubing.
Th ... |
|
 | IOPAK Cream Chiller
Capacity 1,000L/Hr
Tank Capacity: 300L
Product Contact: SUS316 (SUS304 for Non-Contact)
Cream Inlet Temperature 36 °C
Flow Temperature 36°C- 4 °C
It is equipped with 1.5" Rotary Lobe Pump (1,000L/hr) -
This cream cooler will be supplied to Australian Standards. It will be skid mounted. ... |
|
 | MGC Holding Tubes (s/s)
This 10 pass holding tube was used in a water treatment plant in a dairy.
Tube Diameter: 80mm
Number of passes 10
Length of each pass: 3300mm
Capacity: Approx 26³m capacity
Tubes are mounted on a sturdy set of 700mm wide legs.
Overall height of Unit: 2250mm ... |
|
 | JOHNSON Horizontal scraped surface heat exchanger
The unit was previously used for texturisation of chocolate paste.
Name Plate Details -
JACKET SIDE
Design Press (N/mm) 1.379
Hydraulic Test Press (N/mm) 2.07
Design Temp (Deg C) 195
Cap (Litres) 11.51
Medium Water
PRODUCT SIDE
Design Press (N/mm) 3.45
Hydrauli ... |
|
 | HOTCO In- Line Heat Exchanger (Electric)
This system is designed to heat pure water that flows through the unit, from 0 degrees C up to 130 degrees C (under pressure) The unit comprises a free standing in- line electric heat exchanger and an electrical control panel :-
Fluid: Pure Water
Temperature: 100 degrees C
Power Rating: 200Kw, plus 10%, 415V, 50Hz
Minimum Rating: 66kW
DELTA, (3 x 66kW Zones)
Heating System:
Eighteen (18) ... |
|
 | JOHNSON VOTATOR Laboratory Scraped Surface Heat Exhanger
This laboratory/pilot scale scraped surface heat exchanger, or continuous cooker, was used in the confectionery industry. ... |
|
 | TMCI CHEMTECH Scraped Surface Heat Exchanger (Continuous Cooker)
This TMCI CHEMTECH scraped surface heat exhanger or continuous cooker was used in the production of licorice.
Details from plate:
JACKET
Design Pressure N/mm: 1.379
Hydrostatic Test Pressure: 2.07
Design Temperature: 195º C
Capacity: 23.46l/min
Product: Steam
PRODUCT
Design Pressure N/mm: 3.45
Hydrostatic Test Pressure: 5.18
Desighn Temperature: 195º C
Capacity: 50L/min
Product: Li ... |
|
 | CONTHERM Scraped Surface Heat Exchangers
This twin column configuration (mounted on a single column) was used in the dairy industy.
Consisting of two banks, this unit has been specifically designed for the Food industry to provide efficient and gentle treatment so that none of the flavour, nutrients or consistency is lost during processing.
The Contherm can be horizontally or vertically mounted and is ideal for heating or cooling ... |
|
 | Stainless Steel Heat Exchanger
This unit consists of 10 spiral formed 25mm dia stainless steel tubes of 3,000mm length set in a flat rack configuration. Centre distance between the tubes is 85mm and the entry and exit ports are 1.5" female dairy.
The unit would be suitable for ambient air interchange or as liquid submersed type heat exchanger. ... |
|
 | STERIFLO UV Water Disinfection System
This STERIFLO unit was used in a large dairy plant for water treatment.
Model CX2
Serial Number: 744
Electrics: 170watts
Inlet/Outlet Size: 50mm
Treatment Chamber Dimensions: 150mm ID X 980mm L
Electrics:220/240
Lamp Current: 800mA
No of lamps -2 (not included)
Fitted with
The Davey Steriflo UV water disinfection system is an effective and economical means of eliminating harmful bac ... |
|
|
Mini Chocolate Temperer with Pump
Single Deck Vibratory Screen
Sidewall Cleated Gooseneck Elevator (s/s frame)
Sidewall Cleated Belt Conveyor (s/s frame)
Metal Detector
Clarifier Centrifuge
Separator Centrifuge