|
 |
 | IOPAK 1" Rotary Lobe Pump (1") This brand new IOPAK rotary lobe pump, is designed to handle viscous products or sensitive products with large particulates. The butterfly curve of the rotor, ensures a characteristic smooth low shear pumping action. This leads to the gentle throughput of delicate and sensitive products, without crushing or breaking them.
Capacity- 650 - 1600/hr
1 inch in and out
100 revolutions= 6L
Motor ... |
 |
 | IOPAK 2" (51mm) Sanitary Self-Priming Pump (CIP) This brand new IOPAK 2" (51mm) self priming positive displacement pump is made AISI316.Self-priming pumps create and maintain a sufficient vacuum level to draw fluid with no external assistance.
As a positive displacement pump, it is able to handle product mixed with air as well as product with a liquid level below the pump. This pump is useful in the milking room as it can suction milk straig ... |
 |
 | IOPAK 2" Rotary Lobe Pump IOPAK 2" ROTARY LOBE PUMP
This BRAND NEW rotary lobe pump comes with an ABB motor.
The specification of the pump is as follows:
Contact material SUS316
[Lobe Pump]
Flow: 5600 - 11,000 litres / hr. (subject to product and head)
Pressure: 5 Bar
Power: 5.5kW
Speed: 500RPM
[ABB Motor - IEC34-1]
Size: 5.5kW
Voltage: 415V
Amp: 12.1A
Frequency: 50Hz
Other: IP55 Rated, 52.5Nm
* Recomme ... |
 |
 | IOPAK 2" Rotary Lobe Pump (2") IOPAK 2" ROTARY LOBE PUMP
This BRAND NEW rotary lobe pump comes with an ABB motor.
The specification of the pump is as follows:
Contact material SUS316
[Lobe Pump]
Flow: 5600 - 11,000 litres / hr. (subject to product and head)
Pressure: 5 Bar
Power: 5.5kW
Speed: 500RPM
[ABB Motor - IEC34-1]
Size: 5.5kW
Voltage: 415V
Amp: 12.1A
Frequency: 50Hz
Other: IP55 Rated, 52.5Nm
* Recomme ... |
 |
 | IOPAK 2" Sanitary Centrifugal Pump (51mm) This brand new IOPAK sanitary centrifugal pump is used mainly in the food and dairy industries to deliver liquid in smaller flow with high pressure and high pressure filtering.
Flow Rate: 20,000L/Hr
Pump Head: 24m (water used as product)
Inlet/Outlet: 51mm
NM - 50
Motor: ABB 4kW, 3 Phase
Food Sanitary Standard
Material SUS 316 ... |
 |
 | IOPAK 2.5" (63mm) Sanitary Self-Priming Pump (CIP) This brand new IOPAK 2.5" (63mm) self priming positive displacement pump is made AISI316. Self-priming pumps create and maintain a sufficient vacuum level to draw fluid with no external assistance.
As a positive displacement pump, it is able to handle product mixed with air as well as product with a liquid level below the pump. This pump is useful in the milking room as it can suction milk str ... |
 |
 | IOPAK 3" Rotary Lobe Pump with Control Box This BRAND NEW rotary lobe 3" (75mm) hot water jacketed pump comes with an ABB motor, water proof control box, white wheel S/S castors, Trolley with handle, BSM connectors, S/S Cover, Mechanical seal. The pump is of excellent quality and very keenly priced.
The specification of the pump is as follows:
Contact material SUS316
[Lobe Pump]
Flow: 6000 - 18,000 litres / hr. (nominal - subject to ... |
 |
 | SANDPIPER Air Diaphragm Pump Stainless Steel cased, double acting air diaphragm pump featuring male Camlok inlet and outlet fittings.
The unit is mounted on a stainless steel base plate and was previously used to pump adhesives.
Footprint - Width 575mm: Depth 530mm
Height - 445mm. ... |
 |
 | WILDEN Air Operated Double Diaphragm Pump (1/2") Wilden P1 - 13 mm (1/2") Plastic Pump
Flow rate to 56.1 LPM (14.8 GPM) (taken from internet - not tested for capacity by PPN)
Max Pressure = 8.6 BAR (125 PS
NON-WETTED HOUSINGS
Description Material
Center Section Polypropylene or Acetal
Air Valve Polypropylene or Acetal
MAXIMUM SUCTION LIFT CAPABILITY
6.1 m (20')
MAXIMUM DIAMETER SOLIDS
1.6 mm (1/16")
... |
 |
 | REGENT Centrifugal Pump (50mm inlet/outlet) Cast Iron This cast iron centrifugal pump was used in a water treatment capacity.
Inlet/outlet: 50mm
Motor Size: 7.5kW
Motor Speed: 2920rpm
Physical Dimensions (Including Motor) 640mm L x 400mm W x 420mm H
SOLD AS IS WHERE IS ... |
 |
|