|
 |
 | IOPAK 10,000L Storage Tank with Stirrer
Tank Diameter : 2,300 mm
Tank Depth : 2,500 mm
Overall Height : 3,000 mm
Outlet Height from Floor : 250 mm
Manhole Diameter : 500 mm
Product In/Outlet Diameter : 50 mm (2”)
Reduction Motor : 3kW @ 49rpm
Material Construction : SUS304 ... |
|
 | AUSMADE (Australian Made) 3 x 600L s/s mixing tanks with platform
These 3 enclosed tanks were part of an ingredients mixing system in a food factory. They are mounted on a stand which includes a s/s platform and access ladder.
Shape: Vertical Cylindrical with dished ends (enclosed)
Capacity: 3 x 600L tanks (nominal capacity)
Tank Dimensions:800mm ID x 1250mm H
... |
|
 | AUSMADE (Australian Made) Jacketed Conical-bottomed tank on platform
This conical bottom vessel was used as a header tank for liquids and emulsions. The angle of the cone is steep, ensuring easy drainage.The conical section IS DIMPLE JACKETED FOR HEATING OR COOLING.It is also fitted with a safety shield to comply with OHS Standards.
Volume 500 litres
Dimensions: Dia 1060 mm
Straight side 400 mm
Cone 500 mm
... |
|
 | ARSOPI Jacketed Mixing Tank (Food grade - never used) with agitator, spray ball etc
This cylindrical, vertical jacketed mixing tank was designed as a mixing vessel in a food factory plant. IT IS UNUSED AND STILL IN ITS ORIGINAL CRATE.
A geared motor drives the agitator.
- 1000mm High x 960mm O/D with Agitation .
Agitator 0.5kW, 108.69rpm
- Pressure: 3.9bar
- Centre Inlet 100mm,
- M/ Hole 300mm + 50mm inlet 2 x 20/32mm inlet, other end 1 x 75m ... |
|
 | AUSMADE (Australian Made) Jacketed tank (used for ice - all s/s)
This insulated, jacketed, vertical cylindrical tank was used for chilled water in a bakery plant. Ice was removed by means of a large manhole in the side.
Volume: 3100L
Dimensions: 1400mm OD x 2050mm H
Sloping bottom with drain.
Opening on top of tank: 250mm x 250mm
Three x 50mm inlets into large side opening (probably for probes)
This tank could be used simply as a storage tank as well.
... |
|
 | IOPAK New Storage Tank (s/s)
This brand new fully stainless steel constructed tank with half-moon lid is of exceptionally sturdy construction. It features straight sides apart from a small rolled section and is fitted with 3" tubular legs.
A conical base leading to a 2" outlet fitted with a dairy fitting forms the discharge, and the outlet height is 350mm above floor level. SMS fittings not BSM fittings used.
Internal Dia ... |
|
 | AUSMADE Separation Tank (s/s)
This lagged stainless steel separation tank features a 1 1/2" (cyclone) entry point, an internal cylindrical shaped baffle arranged to provide a flow underneath at the base, and a centre discharge weir formed from a pipe running up through the base of the tank.
It was previously used in the dairy industry.
Floating solids may be trapped at the surface formed between the baffle and the outer ... |
|
 | AUSMADE (Australian Made) Storage Tank (Vertical cylindrical)
This vertical cylindrical tank was used in a nutraceutical plant. It is fairly squat and so easy to fill.
Nominal Volume: 2000L
Outlet Pipe Dimensions: 40mm BSM
Overall Dimensions: 1450D X 1220H
Outlet is at the bottom on the side with gravity angle to pipe
... |
|
 | AUSMADE (Australian Made) Tank or storage hopper with steep cone
This vertical cylindrical stainless steel storage tank or hopper has a steep cone. It was used in a food factory.
Top Diameter: 1400mm
Straight section to top of cone: 600mm
Start of cone to base (height) 1300mm.
Outlet to floor: 1000mm
Size of outlet: 65mm. Fitted with valve
Overall Height: 2900mm ... |
|
|
Mini Chocolate Temperer with Pump
Single Deck Vibratory Screen
Sidewall Cleated Gooseneck Elevator (s/s frame)
Sidewall Cleated Belt Conveyor (s/s frame)
Metal Detector
Clarifier Centrifuge
Separator Centrifuge